Gas Log Inserts
If you’re looking for ways to keep your fireplace running like new, consider investing in a gas log insert. These inserts heat up the air inside the fireplace and make it easier to get the fire going. Plus, they often come with extra features, such as built-in firepits or even heaters. Here are four tips for keeping your gas log insert in top shape:
1. Clean it regularly: Make sure to clean your gas log insert regularly to prevent build-up and debris from causing problems. Use a vacuum cleaner or a duster to remove any dirt or ash. If you have a wood-burning fireplace, be sure to add wood every few weeks to help keep the insert burning properly.
2. Check the airflow: Make sure there is good airflow inside the fireplace by checking for cracks and crevices. Tighten any screws that may be loose and check for obstructions that may be blocking the airflow. If necessary, use a wire brush to remove any debris buildup.
3. Replace the filter: If your gas log insert is equipped with a filter, replace it every six months or so depending on how often you use the fireplace. If you burn wood, it is recommended to replace the filter every month.
4. Clean the chimney and vents: Make sure your chimney and vents are clear of all debris buildup. This can be done by using a wire brush or a vacuum to remove dirt and ash from the chimneys and vents. If needed, use an aluminum foil loosely wrapped around the top of your chimney to prevent any ash from falling down into your home during the cleaning.
5. Fill with fuel: For wood-burning inserts, make sure that there is sufficient fuel for proper heating of the insert in your fireplace by adding some kind of accelerant like newspaper or pine cones on top of your log pile as it burns away; this helps to make sure that the fire has ample oxygen so that it burns hotter and longer.
6. Make sure your chimney is clean: Every once in a while, especially during the Christmas holiday season or around other holidays, you might find a bit of ash or debris in your chimney. Call the team at Elegant Fireside and Patio for a thorough cleaning!
What are the dangers of a fireplace that doesn’t work properly?
A fireplace that doesn’t work properly is a dangerous thing. Not only is it inconvenient, but it can also be incredibly dangerous. In this article, we’ll discuss some of the dangers of having a fireplace that won’t keep your house warm.
If your fireplace isn’t working properly, it’s likely due to one of three things:
1) A faulty firebox
2) A bad chimney
3) A clogged flue
If you’re not sure which one is causing the problem, bring in an expert to take a look.
If your fireplace isn’t working because of a faulty firebox, the heat from the burning wood won’t reach the bricks at the bottom of the fireplace. This leaves them cold and could lead to cracks in the mortar. Additionally, if there’s no draft from the chimney, smoke and soot will accumulate in the house and create dangerous conditions.
If your fireplace isn’t working because of a bad chimney, the wind won’t be able to travel up and into the firebox because there’s not enough airflow. This can cause your fire to go out or create soot and smoke inside your home.
If your fireplace isn’t working because of a clogged chimney, the smoke isn’t being drawn into the chimney. This could lead to dangerous conditions and a fire hazard.
How can I fix my fireplace and make it last longer?
If your fireplace is not working properly, it could be because of a few simple things that you can do to make sure it runs smoother for years to come. Here are some tips on how to keep your fireplace running like new:
1. Clean the chimney: A build-up of dirt, ash and other debris can cause your fireplace to leak, which can lead to a lot of hassle and expensive repairs. Make sure to clean the chimney every year or when you notice an increase in smoke or poor performance.
2. Inspect the flue: The flue is the pipe that takes air from the chimney and delivers it into the living space. If it’s cracked or damaged, the heat won’t escape as efficiently, which can cause your fireplace to work less effectively. Get a professional inspection every few years to make sure everything’s in good shape.
3. Check the fuel: If you only use natural gas or wood, make sure you have the right kind of fuel and that it’s been properly stored. Store wood outdoors in a dry place and prop open any doors so that animals don’t get inside and help themselves
Elegant Fireside and Patio can help!
As a homeowner, it’s your responsibility to ensure that your fireplace works like it is intended to. If you notice any of the above signs, you need to contact our team of experts from Elegant Fireside & Patio to get a professional inspection done. All our units are made up of experts in fireplace inspections, repairs, and maintenance services who know what to look for to help you prevent or repair any significant issues. With us, you will get to enjoy unparalleled customer service that ensures you are treated with respect, care, and dedication.
If you have any questions or would like to book a visit, we have staff ready to help you with all your questions and concerns. Give our team a call today at (972) 846-4878 or contact us online right away to get more information regarding our fireplace inspection services in Plano, TX. Not only will we reach your home on time, but our team will also get the job done as soon as possible. You can visit our social media for more details about gas log.